Disk Secure Erase

The Secure Erase tab provides settings' configuration for the KillDisk Industrial SSD-specific erase procedures.

Verify erasure
Percentage of disk to be verified after wiping out unused clusters
Initialize disk(s) after erase
Writes the first disk sector (MBR) after erasure to be visible and accessible by OS
Write fingerprint to first sector
This feature writes the specified fingerprint to the first sector of the erased drive. If erased disk is plugged into the system and system boots from this disk the user will see this fingerprint as a message on the screen
Erase confirmation
As a safety precaution to prevent accidental destruction of hard drives KillDisk Industrial uses the user-typed keyphrase mechanism just before the erase procedure is initiated (see below). By default this precaution mechanism is initialized with the key phrase ERASE-ALL-DATA. The key phrase can be modified, configured as a randomly generated set of characters or disabled. The keyphrase should be entered correctly in order to start the erase procedure.
Figure 1: Secure Erase confirmation dialog